Simplify and secure low gas volume and flow measurements

BPC^® Go

The next generation of gas volume and flow meter for laboratory applications

Article No. 17-0000-01

BPC^® Go is the next-generation gas volume and flow meter containing an in-built computer to simplify and secure low gas flow measurements. It automatically measures both wet and dry gases at laboratory scale with high precision and accuracy without the need for recalibration. Built to the highest standards of Scandinavian quality, it is simple to set up and use for online, real-time monitoring from any location.

BPC® Go offers you

Embedded microcontroller to secure measurements and data acquisition
Aurorasoftware platform included
Two measurement resolutions (9 ml and 2 ml)
Calibration free
Large storage capacity (up to 135 000 litres of gas)
Wide measurement range (0.2 ml to 6000 ml/h)
View standardised results from anywhere; even on your phone or tablet
Run both batch and continuous experiments with remote access
Link up to six BPC Go units into one system with BPC Connect.
Add external sensors to the workflow by using BPC DAQ

Easy to start up, easy to use

It’s automatic! That means no costs for labour, no expenses for expert help, and no writing results in Excel files or notebooks. A simple intuitive user interface makes setting up and monitoring any research project simple. Just fill it with water, connect to a power source, then start.

For applications where precise measurements are key

BPC Go is an excellent instrument for any application where the precise volume and flow measurements of wet and dry gases are key. It normalises gas flow rates and volume measurements at 0 ˚C and 1 standard atmosphere (atm). It is also possible to adapt the measurement to either wet or dry gases by allowing or removing measurement contributions from water vapour. Real-time temperature, pressure and humidity compensation ensure all gas volume and flow measurements are accurate.

BPC Go provides a wide detection range with high linearity up to 1500 ml/h for 2 ml flow cell and up to 6000 ml/h for 9 ml flow cell.

Need more information?

Want a quote or a quick walk through from our technical experts? Choose what suits you below.

Bring your experiments to life with Aurora^TM software

Aurora^TM is BPC Instruments’ latest, custom made and revolutionary software solution for monitoring volume and gas flow. It’s slimmed down design makes it optimal for running experiments for long time periods and for storing large amount of data. Control, monitor, display and download data from your experiment using the intuitive web-based Aurora software interface.

Read results from anywhere on any device

It is easy to connect to your local network or the internet, meaning laboratories and R&D institutions around the world can monitor results from any device, including tablets and mobile phones.

Embedded computing to secure measurements

Inbuilt storage and processing from an onboard embedded microcontroller enable BPC Go to store all gas volume and flow measurements. That means data won’t be lost due to a workstation or server crash, potentially saving weeks of research and development work.

Operational flexibility

BPC Go have a high flexibility for various applications. It can be operated as a stand-alone instrument for a specific application or combined with other technologies when measuring low gas volumes and flows in high precision and accuracy is needed. It also enables to run the experiments in batch or continuous modes of operations.

Easy maintenance and calibration free

A modular design makes the maintenance of BPC Go easier than in any BPC Instrument product before it. The calibration-free flow cells come in two resolutions (2 and 9 ml) and can be exchanged at any point.

Control agitation

BPC Go comes with built in capability to control motors from BPC Instruments. Set speed, direction and on and off time to your requirements and rest assured that the content will be well mixed.

Article No. 303-0001-00

Add sensors with BPC DAQ

BPC DAQ is a compact data acquisition unit designed for the BPC Go system, enabling real-time monitoring of analogue sensor data alongside gas production measurements. It connects directly to BPC Go and supports up to four analogue sensors, such as temperature, pH or ORP, with automatic passive and active signal detection for straightforward plug-and-play integration.

BPC DAQ

BPC DAQ is an acquisition unit for BPC Go that enables real-time analogue sensor monitoring alongside gas production measurements. It connects directly to BPC Go and supports up to four sensors, such as temperature, pH or ORP.

What to monitor

BPC DAQ adds process monitoring to the BPC GO platform and enables acquisition of analogue sensor signals commonly used to track biological process conditions, including:

All signals are collected in a structured way, making it easier to interpret results and compare performance over time.

Article No. 302-0001-00

Pair it with BPC Connect

BPC Connect is a compact coordination hub designed for the BPC Go system, allowing up to six BPC Go units to operate as one connected setup. It links the instruments over a local network and brings control, monitoring, and data handling into a single workflow in Aurora, with results stored centrally for easy access and export.

BPC Connect

BPC Connect is a network based coordination hub that turns multiple BPC Go units into one centralised system. Connect up to six units and control and monitor them through a single interface in Aurora software, with data stored in one place.

Article No. 302-0001-00

Turn multiple BPC Go units into a connected system

BPC Connect links up to six BPC Go units on the same network and lets you run them through BPC’s web software Aurora as a single system. You get central storage for all connected units, plus an easier way to work across labs, rooms, or shared setups where several people need access to the same dataset.

BPC Go brochure

Learn more about BPC Go system with BPC DAQ and BPC Connect.

Add process monitoring to your workflow

Learn more about the process monitoring possibilities with BPC Go by using BPC DAQ. and BPC Connect.

Technical specifications BPC^® Go

Measurement performance

Working principle: Liquid displacement and buoyancy
Measurement resolution: 2 and 9 ml
Detection capacity: 3 x 107 ml for 2 ml flow cell and 13 x 107 ml for 9 ml flow cell
Measuring range: 0.2 to 1500 ml/h* for 2 ml flow cell and 1 to 6000 ml/h* for 9 ml flow cell
Repeatability: CV ≤ 3% for 2 ml flow cell and CV ≤ 1% for 9 ml flow cell
Gases: Non-aggressive gases (e.g. CH4, CO2, H2, N2,…)
Article no: 17-0000-01 * Lower range limit refers to the measurement of gases with low solubility in water (e.g. N2, CH4, O2, CH4, H2)

Technical

Built-in sensors: Temperature, Pressure, Hall, Gyro
Connections: Ethernet, Power supply, USB B, Motor control
Display: OLED 2.8”
256×64 white
Housing: Aluminium and plastic
Power supply: 12 V DC / 1.0 A with 100-240 VAC
Usage: Indoor
Measurement medium: Deionised or distilled water
Operation temperature: 10 – 50 °C
Operation pressure: -50 – 50 mbar

Size & weight

BPC Go base unit: 188 x 114 x 41 mm, 366 g
Flow cell unit: 138 x 102 x 45 mm, 134 g (without water)
Power supply unit: 89 x 48 x 33 mm, 127 g
Gas connector diameter: ID: 2.4-2.6 mm, OD: 4.2-4.7 mm
Recommended tube size: ID: 3.2 mm, OD: 6.4 mm

Request a quote

Use the form below to request pricing. Share what you’re interested in and any relevant details, and we’ll come back with a quotation and lead time as soon as possible.

For urgent matters, please call us on +46 (0) 46 16 39 50.